Products

RESTRAINT SYSTEMS

Clip specifically developed for panel claddings installed on masonry walls, half carrying; designed for medium loads, longitudinally ribbed in order to provide higher strength and stiffness.

DIRECT ANCHORING SYSTEMS

Single fixed anchoring of great simplicity and strength for self-supporting enclosure walls. The bolt with total length (L) consists of two parts, being the first part built-in inside the wall (E) and the second one protruding from the wall with length (X), which supports the weight (P) of the cladding at its end.

SYSTEMS WITH SUBSTRUCTURE

Fixed anchoring of a great capacity and resistance specifically designed to be mounted on PF-ALU aluminum profiles.

SUBSTRUCTURE

The versatility of this profile more than surpasses any other in the market, since it allows speedy assembly by doing away with the double angle brackets, which are substituted by just one larger sized bracket that is anchored to the profile with four or six self-tapping screws.

INDOOR CLADDING SYSTEMS

The system is completely dry, clean and safe, fitting takes place on an existing cladding, which does not have to be removed, thus reducing the amount of debris as well as working hours by 40 % and the total renovation costs by 30 to 40%.

CURTAIN WALL

The Masa Integral System (Sistema Integral Masa or SIM in Spanish) has been designed in response to a product requirement resulting from the further development of fastening systems for ventilated façades: the inclusion of the enclosure walls as part of the fastening system for use as a lightweight façade.

CUSTOMIZED SYSTEMS

The solutions offered by Sistema Masa include those that pertain to specific designs, applied to projects that are somewhat peculiar in terms of fastening elements.